Rossi RP63 Revolver 3 in Sniper Green Cerakote, 6 Rd

The Rossi RP63 Revolver 3 in Sniper Green Cerakote, 6 Rd is a compact, hammer-fired stainless steel frame revolver built for concealed carry and everyday carry profiles. This 3-inch barrel six-shooter wears a durable Sniper Green Cerakote finish on the barrel and frame, paired with aggressive Black LOK G10 grips for a secure purchase. It operates in double- and single-action with a replaceable hammer-mounted firing pin and a hammer block safety for reliable, safe function. Per Rossi specs, the cylinder holds six rounds of .357 Magnum or .38 Special, making it a practical choice for shooters who want a lightweight, corrosion-resistant revolver that stands out at the range or on the belt.

Last updated: April 2026.

Manufacturer	Rossi
Model	RP63
Material	Stainless steel frame, Cerakote finish (per manufacturer specs)
Compatibility	.357 Magnum / .38 Special +P
Finish	Sniper Green Cerakote
Weight	Approx. 28 oz (empty, per manufacturer specs)
Condition	New

Key Features

• Sniper Green Cerakote Finish — WHY IT MATTERS: This isn’t just a color; it’s a baked-on ceramic coating that resists holster wear, sweat, and moisture better than standard bluing, giving your everyday carry revolver a tough, low-glare edge.
• 3-Inch Barrel with Full Underlug — WHY IT MATTERS: The 3-inch barrel balances concealability with sight radius and velocity retention, while the full underlug adds front-end weight to tame muzzle rise during rapid double-action strings.
• Black LOK G10 Grips — WHY IT MATTERS: These textured laminate grips lock your hand into a consistent index point, even with sweaty palms or gloves, reducing the chance of grip shift under recoil.
• Replaceable Hammer-Mounted Firing Pin — WHY IT MATTERS: If the firing pin ever chips or breaks, you swap it out without sending the whole gun back, saving downtime and keeping your revolver in the rotation.
• Hammer Block Safety — WHY IT MATTERS: A passive internal block prevents the hammer from contacting the firing pin unless the trigger is pulled fully, giving you drop-safe carry without a manual safety to fumble with.

Who It’s For

The RP63 is for the shooter who wants a compact revolver with a tactical edge — think concealed carriers who appreciate a six-shot capacity over a five-shot snubby, collectors who dig military-inspired finishes, and anyone who wants a stainless steel frame with an upgrade-ready Cerakote job straight from the factory.

Pros & Cons

• Pro: Sniper Green Cerakote is rare in factory revolvers — you get a custom-shop look without the wait or upcharge.
• Pro: 6-round cylinder gives you one more round than most J-frame-style revolvers, which matters in a defensive scenario.
• Con: The factory trigger has a slightly heavier pull than aftermarket-tuned revolvers — plan on a spring kit or dry-fire practice to smooth it out.

Comparison

Feature	Rossi RP63 (Sniper Green)	Smith & Wesson Model 642	Ruger LCRx (3-inch)
Caliber	.357 Mag / .38 Spl	.38 Spl +P	.357 Mag / .38 Spl
Capacity	6 rounds	5 rounds	5 rounds
Finish	Sniper Green Cerakote	Silver/black	Black anodized
Weight (empty)	~28 oz	~15 oz	~17 oz
Action	DA/SA, hammer-fired	DAO, hammerless	DA/SA, hammer-fired
Grips	Black LOK G10	Rubber	Hogue Tamer
Price	$479.94	~$500	~$650

FAQ

Is the Rossi RP63 compatible with .38 Special +P ammunition?

Yes, per Rossi specs, the RP63 is rated for .38 Special +P and .357 Magnum loads. The stainless steel frame and 3-inch barrel handle the extra pressure safely, but +P will accelerate wear slightly faster than standard-pressure loads.

Can I mount an optic on the RP63?

No — the RP63 comes with a fixed front sight and a rear notch milled into the top strap. There is no factory optic cut or rail. If you want a red dot, you would need a gunsmith to mill the top strap or use a replacement rear sight base, which may affect warranty.

Does the Sniper Green Cerakote chip or scratch easily?

Cerakote is more durable than paint or bluing but can still scratch under hard use — especially on sharp edges like the muzzle crown or cylinder flutes. The baked-on finish resists holster wear better than most factory coatings, but expect honest carry marks over time.

What is the trigger pull weight on the RP63?

Factory double-action pull averages 10–12 pounds; single-action breaks around 4–5 pounds. These are typical for a mass-production revolver. Aftermarket springs can reduce pull weight by 2–3 pounds if desired.

Is the RP63 legal in all 50 states?

Yes — the RP63 is a standard revolver with no threaded barrel, no magazine capacity limits, and no assault weapon features. It ships to all 50 states. Check your local laws for carry permits.

Why Buy the Rossi RP63?

At $479.94, this revolver gives you something most competitors don’t: a six-shot .357 Magnum with a factory-applied Sniper Green Cerakote finish. The stainless steel frame keeps corrosion at bay, and the Black LOK G10 grips lock your hand in place under recoil. According to the National Shooting Sports Foundation, revolver sales have held steady at roughly 15% of the handgun market annually — shooters still want wheelguns for their reliability and simplicity. The RP63 fills that niche with a modern twist.

✓ Nationwide delivery (all 50 states)
✓ Ships 1–2 business days
✓ 30-day returns
✓ Secure checkout

Explore more: Revolvers | Concealed Carry | Cerakote Firearms